What Is Corten Steel, and Is It Right for an Austin Yard?

Corten steel in Central Texas

What Is Corten Steel, and Is It Right for an Austin Yard?

By Brendon Wash, Modern Steel & Fence, Georgetown TX

Short answerCorten is a weathering steel. It is left bare instead of painted, and as it gets wet and dries over and over it forms a rust-brown surface layer that becomes the finish. People use it for privacy fences, screens, planters and trim. Plan for the color to change over the first months and for rust-colored runoff while it weathers.
Cut-pattern weathered steel privacy screen panels
Cut-pattern weathered steel panels.

What Corten is

Corten (also written COR-TEN) is the common name for weathering steel: steel with a little copper, chromium and nickel mixed in. Regular steel left bare keeps rusting and flaking. Weathering steel builds a tight rust layer on the surface instead, and that layer is the look people want: deep orange-brown, a little uneven, different on every panel.

How long the color takes

New Corten arrives gray or with a light orange bloom from the mill. Outside, it turns orange within weeks and darkens toward brown over months. How fast depends on how often it gets wet and dries: rain, sprinklers and humidity speed it up; a covered porch slows it down. Some people mist new panels with water to hurry it along.

Does Corten stain concrete?

Yes, while it weathers. Rain runs off the steel carrying rust color, and that marks concrete, limestone and stucco below it. This is the most common surprise. Ways to plan for it:

Woven weathered steel privacy fence on a stone wall
A woven weathered steel fence on a stone wall.

Where it works well in Austin

UseWhy people pick it
Privacy fences and wallsSolid or slatted panels that look like part of the landscape.
AC, pool and trash screensHides equipment; cut patterns leave room for air.
Planters and edgingThe brown sits well next to limestone, cedar and native plants.
Accent panels and signsA cut pattern or logo in a single sheet.

Things to know before you pick it

Keep the bottom out of the dirt

Steel that sits in wet mulch or soil stays wet and never forms its surface layer there. Hold the bottom edge up off the ground.

It is not a painted finish

If you want one even color, you want painted or powder-coated steel instead. Corten is for people who like a finish that changes.

Sealing is optional

Some owners seal Corten once it reaches the color they like, to cut down on runoff near a patio. Others leave it bare. Ask us which fits your spot.

Common questions

Can you paint Corten steel?

You can, but then you lose the reason to buy it. If you want a painted look, plain steel with paint or powder coat is the usual choice.

Does Corten rust through?

It needs to dry out between rains to form its surface layer. Keep it out of standing water, dirt and mulch.

Can Corten be cut into patterns?

Yes. We cut patterns, logos and slots into Corten sheets on our CNC plasma table and frame them in steel.

Is Corten good next to a pool?

Keep it back from the coping and light-colored paving around the pool, because runoff can stain them. A planting bed between the steel and the pool works well.

See our steel work

Thinking about Corten?

Send a photo of the spot, rough lengths and heights, and any HOA rules. Built in our Georgetown shop and installed.

Send us your photos(512) 508-7765